Toshiba W708 Owners Manual - Page 36

ADDITIONAL INFORMATION Multi Brand Remote Control The remote control can be compatible with various brands of TV by setting their control codes. The TOSHIBA code has initially been set to control TOSHIBA TVs. 1 2 3 4 5 6 789 0 100 PLAY/x2 REW FF STOP 1 POWER CH/TRK TV VOL 100 Number buttons DISPLAY I.SELECT ENTER 2, 3 Setting Control Codes 1 Press TV to set the remote control operating your TV. 2 While holding down PROG., enter the two digits of your TV's brand code (listed right) using number buttons. Hold down. PROG. Example 02 3 Release PROG.. 4 Point the remote control at your TV and use each button listed below to make sure that your TV is operated correctly. POWER To turn the TV on or off. CH/TRK To select TV channels in the upper or lower direction. TV VOL To adjust the sound level. I.SELECT To select an external source such as a VCR. Number buttons To select TV channels. When selecting channels 1 to 9, first enter 0 and then the desired number. 100 To substitute for 100 channel key. DISPLAY To turn on or off TV's screen display. ENTER To use for the TV's ENTER key. Important Some TVs may not respond to all the operations above, or may not be operated at all with this remote control. In this case, operate your TV with its own remote control. Notes • For some brands, several control codes (brand codes) are allocated. Try each of them until the buttons work on your TV. • If you replace the remote control's batteries, set the brand code again. 36