Toshiba W708 Owners Manual - Page 28
Timer Program Recording continued, PLAY/x2, PROG., TIMER
View all Toshiba W708 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Timer Program Recording (continued) 6 Move to the next using FF, and set the hour and minutes of the recording start time. PROGRAM SET UP PRESET CH DATE On OFF SPD 25 8 / 30 9 : 30PM - : -- SLP EnD: PROG 7 Move to the next, and set the recording off time. PROGRAM SET UP PRESET CH DATE On OFF SPD 25 8 / 30 9 : 30PM 10 : 00PMSLP EnD: PROG 8 Move to the next, and select the tape speed (SP) using PLAY/x2 or STOP. For the tape speed "AUTO (Auto Speed Select)", see below. To set another program, press FF, and select the next line pressing STOP. Repeat steps 4 to 8. PROGRAM SET UP PRESET CH DATE On OFF SPD 25 8 / 30 9 : 30PM 10 : 00PMSP EnD: PROG 9 Press PROG.. Now programming is completed. 10 Press both TIMER simultaneously. The power turns off and the VCR enters the timer standby mode. REC POWER TIMER TIMER Auto Speed Select If you are not sure the tape is long enough for timer program recording in the SP tape speed, set the recording tape speed to "AUTO". Recording starts in the SP tape speed and the VCR automatically selects the tape speed to record the program to the end. If the tape length is not long enough, the tape speed automatically changes from SP to SLP. Notes • Make sure that the tape length is selected correctly according to the tape used on the SET UP screen (page 24). • When the SLP tape speed is selected and the tape length is not sufficient to record the program to the end, the program cannot be recorded to the end. • The picture will be distorted when playing the part where the recording tape speed is switched from SP to SLP with the Auto Speed Select feature. 28