Toshiba e805 User Guide - Page 105

Chapter 7: Getting Connected • The server to which you are connecting does not use dynamically-assigned addresses, and you need to enter your TCP/IP settings. • You need to change server DNS or WINS settings. To change advanced settings, tap Advanced. Otherwise, tap Finish. To edit proxy settings: 1. Tap , Settings, Connections tab. 2. To change proxy server settings, in My Work Network, tap Edit my proxy server. 3. Select This network connects to the Internet and This network uses a proxy server to connect to the Internet. 4. In the Proxy server box, enter the proxy server name. 5. To change such settings as port number or proxy server type, tap Advanced and change desired settings. End a Connection To disconnect, do one of the following: • When connected via dial-up or VPN, tap the Connection icon, , on your navigation bar, and then tap End. • When connected via cable or cradle, detach your device from the cable or cradle. • When connected via Infrared, move the device away from the PC or device. • When connected via a network (Ethernet) card, remove the card from your device. • When connected via a wireless network, switch off the connection. Connect Directly to an Email Server You can set up a connection to an email server so that you can send and receive email messages by using a modem or network connection and Inbox on your device. NOTE The ISP or network must use a POP3 or IMAP4 email server and an SMTP gateway. You can use multiple email accounts to receive your messages. For each email account you intend to use, first set up and name the email account. Downloaded from www.Manualslib.com manuals search engine 105