Toshiba e805 User Guide - Page 23

Chapter 2: Basic Skills Wireless Communication Switch 1. To enable Wireless module (Wireless LAN/Bluetooth models only), make sure the Wireless Communication Switch is turned on. (The default setting is Power Off. Open the switch cover, then slide the switch to the left to turn the power on.) If the switch is on, a window will pop up with a list of networks. 2. Select a network. On Windows Mobile 2003, if the switch is turned on, a window will popup to show the list of existing networks you can join. On Off Switch Cover Wireless Communication Switch Wireless LED Descriptions LED indicates the different status: LED Off Orange Status Wireless Communication Switch is turned OFF Wireless Communication Switch is turned ON Hold Switch When the Hold switch is on, Program Buttons 1 through 5, Cursor Button, and Scroller will be disabled. The Hold switch icon will be displayed on the navigation bar. On the contrary, when the Hold switch is off, these buttons will be enabled again. Downloaded from www.Manualslib.com manuals search engine 23