Tripp Lite 5PXEBM72RTG2 Owners Manual for 5PX1000RTG2 5PX1000RTNG2 5PX1500RTG2 - Page 15
UPS connection, Connection with a FlexPDU (Power Distribution Unit) optional module
View all Tripp Lite 5PXEBM72RTG2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
3.5 UPS connection Check that the indications on the name plate located on the back of the UPS correspond to the AC-power source and the true electrical consumption of the total load. 1. Connect the UPS input cable (13) to the AC power source. 2. Connect the loads to the UPS. It is preferable to connect the priority loads to the outlets marked (3) and the non-priority loads to the outlets Group1, Group2 (4) that can be programmed. For the 5PX 2000 / 3000 models, connect any high-power devices or matching Power Distribution Unit (PDU) to the L5-20R or L5-30R outlet. 3. To program shutdown and startup of the Group1 and Group2 outlets in order to extend battery runtime and perform scheduled shutdowns, please see the "In/Out settings" section. 3.6 Connection with a FlexPDU (Power Distribution Unit) optional module 1. Connect the UPS power cord (13) to the AC power source. 2. Connect the input cord of the FlexPDU module (24) to one of the UPS outlets (3). 3. Connect the equipment to the outlets (41) on the FlexPDU module. These outlets differ, depending on the version of the FlexPDU module. 3.7 Connection with a HotSwap MBP (Maintenance ByPass) optional module The HotSwap MBP module makes it possible to service or even replace the UPS without affecting the connected loads (HotSwap function). 614-40095-00 15