Tripp Lite 5PXEBM72RTG2 Owners Manual for 5PX1000RTG2 5PX1000RTNG2 5PX1500RTG2 - Page 26
Installation of the communication cards, UPS remote control functions, Connectivity cards
View all Tripp Lite 5PXEBM72RTG2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Installation of the communication cards It is not necessary to shutdown the UPS before installing a communication card. 1. Remove the slot cover (9) secured by screws. 2. Insert the communication card in the slot. 3. Secure the card cover with the two screws to connect the comm card to the ground. 4.6 UPS remote control functions Connectivity cards Connectivity cards allow the UPS to communicate in a variety of networking environments and with different types of devices. The 5PX models have one available communication bay for the following connectivity cards: • Gigabit Network card (Network-M2) : provides a Gigabit Ethernet connection and enables secure UPS monitoring over HTTPS web browser interface, SNMP v1/v3 protocol and email alarms. In addition, up to 3 Environmental Monitoring Probes can be attached to obtain humidity, temperature, smoke alarm, and security information. • Industrial Gateway card (INDGW-M2) : Provides Modbus RTU and Modbus TCP communication support in addition to the same secure UPS monitoring, management and sensor capability as the Gigabit Network card. • Relay-MS card : provides isolated dry contact (Form-C) relay outputs for UPS status: Utility failure, Battery low, UPS alarm/OK, or on Bypass. • INDRELAY-MS : The Industrial relay Card-MS (INDRELAY-MS) provides a simple way to remotely input UPS information to an alarm system, PLC or a computer system via dry contacts. It offers five isolated dry contact outputs and one isolated dry contact input. 614-40095-00 26