Tripp Lite SMART750RMXL2U Owner's Manual for SmartPro 2U Rackmount UPS 933149 - Page 8

External Battery Connection, Select Models - instructions

Get Tripp Lite SMART750RMXL2U PDF manuals and user guides View all Tripp Lite SMART750RMXL2U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

Optional Installation continued 3 External Battery Connection (Select Models) Your UPS comes with a robust internal A battery system; external batteries are needed only to extend runtime. Adding external batteries will increase recharge time as well as runtime. This UPS supports BP24V15RT2U (limit 1), BP24V28-2U (limit 3 1) and BP24V70-3U (multi-pack). The illustration (see 3 ) shows the location of your UPS's External Battery Connector A where you will insert the battery pack cable. Complete installation instructions for your battery pack appear in the battery pack owner's manual. Make sure that cables are fully inserted into their connectors. Small sparks may result during battery connection; this is normal. Do not connect or disconnect battery packs when the UPS is running on battery power. CAUTION! When an external battery pack is connected, make sure the AC load does not exceed the nameplate rating. Select models are derated when an external battery pack is connected. See UPS nameplate label for derating details. When connecting external batteries to the UPS, go to the Tripp Lite website at www.tripplite. com/en/support/bpcon g/index.cfm to download the External Battery Pack Utility software to con gure your UPS for external battery support. Model Name SMART1000RM2U SMART750RMXL2U Wattage with Internal Batteries Only 800W 600W Wattage with External Batteries Attached N/A 450W Note: 1. The runtime will automatically recalculate once the External Battery Pack Tool process is complete. 2. If the setup will no longer include external batteries, the UPS can be con gured to work without external batteries via the LCD Screen. See External Battery Settings Control section under Basic Operation for details. 3. If external battery packs are removed, the UPS must be reset to "NO EXTERNAL BATTERY" via the LCD interface or the External Battery Con guration Program available on the Tripp Lite website. Failure to do so may result in damage to the internal batteries due to over-charging. 8 201205048 93-3149.indb 8 6/19/2012 11:33:37 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
8
3
A
Optional Installation
continued
3
External Battery Connection
(Select Models)
Your UPS comes with a robust internal
battery
system;
external
batteries
are
needed only to extend runtime. Adding
external batteries will increase recharge time
as well as runtime. This UPS supports
BP24V15RT2U
(limit 1), BP24V28-2U
(limit
1) and BP24V70-3U
(multi-pack).
The illustration (see
3
) shows the location of your UPS’s External Battery Connector
A
where
you will insert the battery pack cable. Complete installation instructions for your battery pack
appear in the battery pack owner’s manual. Make sure that cables are fully inserted into their
connectors. Small sparks may result during battery connection; this is normal.
Do not connect or disconnect battery packs when the UPS is running on battery power.
CAUTION! When an external battery pack is connected, make sure the AC load does not
exceed the nameplate rating. Select models are derated when an external battery pack
is connected. See UPS nameplate label for derating details.
Model Name
Wattage with Internal
Batteries Only
Wattage with External
Batteries Attached
SMART1000RM2U
800W
N/A
SMART750RMXL2U
600W
450W
Note:
1. The runtime will automatically recalculate once the External Battery Pack Tool process is complete.
2. If the setup will no longer include external batteries, the UPS can be configured to work without external
batteries via the LCD Screen. See External Battery Settings Control section under Basic Operation for details.
3. If external battery packs are removed, the UPS must be reset to “NO EXTERNAL BATTERY” via the LCD
interface or the External Battery Configuration Program available on the Tripp Lite website. Failure to do so
may result in damage to the internal batteries due to over-charging.
201205048
93-3149.indb
8
6/19/2012
11:33:37 AM
When connecting external batteries to the UPS, go to the Tripp Lite website at www.tripplite.
com/en/support/bpconfig/index.cfm
to
download
the
External
Battery
Pack Utility software to
configure your UPS for external battery support.