Uniden 1060-2 English Owners Manual - Page 27

Settings menu Tones You can switch on or off the tones for key touch, confirmation, call waiting, and out-of-range alarm. For example, when the key tone is set to ON, you will hear a tone each time you press a keypad button. 1 Press to access the main menu. 2 Press or until Audio Setting is displayed and press . 3 Press until Tones is displayed. Press . 4 Press or to select the option you want Key Confirmation Warning Call Waiting Range Alarm. Press . 5 Press or to display either On or Off and press to confirm. For Key tone, select from pattern 1-3 or off and press . 6 Press to exit and return to standby. Dial mode You can set your phone to use either Tone or Pulse dialing. The pre-set setting is TONE dialing, where you will hear a tone beep each time you dial a number. Most modern exchanges and switchboards use Tone dialing, so you should not need to change this setting. Only change it if your switchboard uses Pulse dialing or if you cannot make a call using Tone dialing. 1 Press to access the main menu. 2 Press or until Base Settings is displayed and press . 3 Press or to select Additional and press . 4 Press press or to display Dial Mode and . The current setting is displayed. [26]