Uniden 1060-2 English Owners Manual - Page 29

If the base already has the maximum number of handsets (6) registered to it you will need to deregister one of the existing handsets before you can register the new handset. See section for de-registering handsets. On the handset you want to register: Enter the base PIN code. Pre-set base PIN code is 0000. You will hear a confirmation tone when registration is complete. When in standby, the new handset number will be displayed. The handset will automatically be allocated with the next available handset number. If registration is unsuccessful, the display will show Not Registered and you will need to follow the registration procedure again. De-register a handset or a base If you have more than one handset registered to your base or more than one base registered to your handset(s), you can de-register both the handset from the base or the base from the handset. Before registering, make sure all handsets and the base are in standby. 1 Press to access the main menu. 2 Press or until Add. Settings is displayed and press . 3 Press or to display Deregister and press . 4 Press or to select Handset or Base and press . 5 Press or to display the handset or base you want to de-register and press . 6 Press or to select Yes and press . If the handset registers to the base successfully, you will hear a confirmation tone. 7 Press to exit and return to standby. [28]