Uniden DC10QG Owners Manual - Page 12

Attaching The Dc10qg

Get Uniden DC10QG PDF manuals and user guides View all Uniden DC10QG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

The camera can support microSDHC cards (High Capacity microSD) up to 128GB in capacity. Uniden recommends using a good quality microSDHC card of at least 16GB capacity and minimum Class 10 speed. (A 16GB microSD card and SD to microSD adapter are included.) Gently insert a formatted microSD card (see page 24) in the slot on the side of the camera. To remove the card from the slot, press the edge of the microSD card inwards for it to pop out and then pull it out of the slot. ATTACHING THE DC10QG 1. Be sure the bracket locking ring is set to unlock. Press the suction cup base to the windshield. 2. Slide the DC10QG onto the bracket hook on the bottom of the windshield mount until it locks into position. 3. Insert the GPS antenna connector into the camera. 4. Place the bracket onto the windshield and turn the locking ring to lock. Make sure the bracket is locked to the windshield. 5. To unmount the bracket, turn the locking ring to the unlock ( ) position and then lift the plastic flap on the base to release it from the windshield. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
12
The camera can support microSDHC cards (High
Capacity microSD) up to 128GB in capacity. Uniden
recommends using a good quality microSDHC card of
at least 16GB capacity and minimum Class 10 speed.
(A 16GB microSD card and SD to microSD adapter are
included.)
Gently insert a formatted microSD card (see page 24)
in the slot on the side of the camera. To remove the card
from the slot, press the edge of the microSD card inwards
for it to pop out and then pull it out of the slot.
ATTACHING THE DC10QG
1.
Be sure the bracket locking ring is set to unlock.
Press the suction cup base to the windshield.
2.
Slide the DC10QG onto the bracket hook on the
bottom of the windshield mount until it locks into
position.
3.
Insert the GPS antenna connector into the camera.
4.
Place the bracket onto the windshield and turn the
locking ring to lock. Make sure the bracket is locked
to the windshield.
5.
To unmount the bracket, turn the locking ring to the
unlock (
) position and then lift the plastic flap on
the base to release it from the windshield.