Uniden UDR777HD User Manual - Page 48
Interference
View all Uniden UDR777HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
If... Try.. The camera won't pair with the monitor. • making sure the camera is plugged in. • pressing and releasing the pairing button quickly. Do not press and hold the pairing button. • Check if other cameras in the area are also in Pairing mode. Disconnect power to other cameras. When I power up my monitor and cameras for the first time, they seem to be on but there is no picture on the screen. • verifying that the cameras are turned on (see page 54). • verifying that the monitor is displaying a channel with a camera assigned to it. The monitor picture has frozen. I cannot remotely access my recorded files. Using a blunt object like an unbent paper clip to press RESET on the back of the monitor to reset the monitor. The monitor turns off. Press POWER to turn it back on. • Verify that the monitor is connected to the internet. • Verify that the time zone is set correctly for the monitor. If you are away from your system, you will need someone to verify these items for you. INTERFERENCE This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules and ETSI (EN) 300328. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television equipment reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 48