ViewSonic PG706WU - 4000 Lumens WUXGA Projector with RJ45 LAN Control Vertical K - Page 16
Initial Setup
View all ViewSonic PG706WU - 4000 Lumens WUXGA Projector with RJ45 LAN Control Vertical Keystone and Optical Zoom manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Initial Setup This section provides detailed instructions for setting up your projector. Choosing a Location Personal preference and room layout will decide the installation location. Consider the following: • Size and Position of your screen. • Location of a suitable power outlet. • Location and Distance between the projector and other equipment. The projector is designed to be installed in one of the following locations: 1. Front The projector is placed near the floor in front of the screen. 2. Front Ceiling The projector is suspeneded upsidedown from the ceiling in front of the screen. 3. Rear Ceiling The projector is suspended upside-down from the ceiling behind the screen. NOTE: A special rear projection screen is required. 4. Rear The projector is placed near the floor behind the screen. NOTE: A special rear projection screen is required. 16