ViewSonic PG706WU - 4000 Lumens WUXGA Projector with RJ45 LAN Control Vertical K - Page 95
Lamp Information, Lamp Hour, Extending Lamp Life, Advanced, Lamp Settings, Setting Lamp Mode
View all ViewSonic PG706WU - 4000 Lumens WUXGA Projector with RJ45 LAN Control Vertical Keystone and Optical Zoom manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Lamp Information This section will provided a better understanding of your projector's lamp. Lamp Hour When the projector is being used, the duration (in hours) of lamp usage is automatically calculated by the built-in timer. To obtain the lamp hour information: 1. Press Menu to open the OSD Menu and go to: Advanced > Lamp Settings > Lamp Hours Information. 2. Press Enter and the Lamp Hours Information page will appear: 3. Press Exit to leave the menu. Extending Lamp Life To prolong lamp life, you can adjust the following settings in the OSD Menu. Setting Lamp Mode Setting the projector in Eco, Dynamic Eco, or SuperEco+ mode reduces system noise, power consumption, and extends the lamps operational life. Lamp Mode Normal Eco Dynamic Eco SuperEco+ Description Provides full lamp brightness. Reduces lamp power consumption by 20% (PG701WU)/30% (PG706WU/PG706HD) and lowers brightness, and decreases fan noise. Reduces lamp power consumption by up to 30% (PG701WU)/65% (PG706WU/PG706HD) depending on the content's brightness level. Reduces lamp power consumption by 60% and lowers brightness to extend the lamp life and decreases the fan noise. To set the Lamp Mode, open the OSD Menu and go to: Advanced > Lamp Settings > Lamp Mode and press / to select and press Enter. Setting Auto Power Off This allows the projector to turn off automatically after a set period of time once no input source is detected. Open the OSD Menu and go to: POWER MANAGEMENT > Smart Energy > Auto Power Off and press / to disable or adjust the time. 95