ViewSonic PG706WU - 4000 Lumens WUXGA Projector with RJ45 LAN Control Vertical K - Page 73

High Altitude Mode, Security Settings, Remote Control Code, Control Method, Baud Rate

Get ViewSonic PG706WU - 4000 Lumens WUXGA Projector with RJ45 LAN Control Vertical Keystone and Optical Zoom PDF manuals and user guides View all ViewSonic PG706WU - 4000 Lumens WUXGA Projector with RJ45 LAN Control Vertical Keystone and Optical Zoom manuals
Add to My Manuals
Save this manual to your list of manuals

Page 73 highlights

Menu Option Description High Altitude Mode We recommend you use the High Altitude Mode when your environment is between 1,500 m to 3,000 m above sea level, and ambient temperature is between 5°C-25°C. NOTE: • Do not use High Altitude Mode if your environment is between 0 to 1,499 m, and the temperature is between 5°C to 35°C. If used, the projector will become over cooled. • Using "High Altitude Mode" may cause more operating noise, as the fan speed will be increased to improve cooling and performance. Quick Auto Search Allows the projector to automatically search for the signals. Security Settings See "Using the Password Function" on page 23. Panel Key Lock Locks the control keys on the projector. Remote Control Code Sets the remote control code for this projector (between 1~8). When multiple adjacent projectors are in operation at the same time, switching the codes can prevent interference from other remote controls. After the remote control code is set, switch to the same ID for the remote control to control this projector. To switch the code for the remote control, press ID set and the number button corresponding to the remote control code together for 5 seconds or more. The initial code is set to 1. When the code is switched to 8, the remote control can control every projector. NOTE: If different codes are set on the projector and remote control, there will be no response from the remote control. When that happens, a message will display to remind you to switch the code for the remote control. Control Method Allows you to select a preferred control port: through the RS-232 port or the USB port. When selecting USB, USB A Power will be switched to Off automatically. Baud Rate Selects a baud rate that is identical with your computer's so that you can connect the projector using a suitable RS-232 cable and control the projector with RS-232 commands 73

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
73
Menu Option
Description
High Altitude Mode
We recommend you use the High Altitude Mode when your
environment is between 1,500 m to 3,000 m above sea level,
and ambient temperature is between 5°C–25°C.
NOT±:
•
Do not use High Al°tude Mode if your environment is
between 0 to 1,499 m, and the temperature is between
5°C to 35°C. If used, the projector will become over
cooled.
•
Using “High Al°tude Mode” may cause more opera°ng
noise, as the fan speed will be increased to improve
cooling and performance.
Quick Auto Search
Allows the projector to automatically search for the signals.
Security Settings
See “Using the Password Function” on page 23.
Panel Key Lock
Locks the control keys on the projector.
Remote Control Code
Sets the remote control code for this projector (between 1~8).
When multiple adjacent
projectors are in opera°on at the same
°me, switching the codes can prevent interference from other
remote controls. Aſter the
remote control code
is set, switch to
the same ID for the remote control to control this projector.
To switch the code for the remote control, press
ID set
and
the number bu²on corresponding to the remote control code
together for 5 seconds or more. The ini°al code is set to 1.
When the code is switched to 8, the remote control can control
every projector.
NOT±:
If different codes are set on the projector and remote
control, there will be no response from the remote
control. When that happens, a message will display to
remind you to switch the code for the remote control.
Control Method
Allows you to select a preferred control port: through the
RS-232 port or the USB port.
When selecting USB, USB A Power
will be switched to Off automatically.
Baud Rate
Selects a baud rate that is identical with your computer’s so
that you can connect the projector using a suitable RS-232
cable and control the projector with RS-232 commands