ViewSonic PJ755D User Guide - Page 24
Appendices - troubleshooting
UPC - 766907071917
View all ViewSonic PJ755D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Appendices Troubleshooting If you experience trouble with the projector, refer to the following information. If the problem persists, please contact your local reseller or service center. Problem: No image appears on screen. Ensure all the cables and power connections are correctly and securely connected as described in the "Installation" section. * Ensure the pins of connectors are not crooked or broken. * Check if the projection lamp has been securely installed. Please refer to the "Replacing the lamp" section. * Make sure you have removed the lens cap and the projector is switched on. * Press A/V Mute button to maker sure the image has not been turned off temporarily. Problem: Partial, scrolling or incorrectly displayed image. * Press the "Sync" button on the Remote Control or Press the "Re-Sync" button on the Control Panel. * If you use a PC: If the resolution of your computer is higher than 1024 x 768. Follow the steps outlined below to reset the resolution. For Windows 3.x: 1 . In the Windows Program Manager, click the "Windows Setup" icon in the Main group. 2 . Verify that your display resolution setting is less than or equal to 1024 x 768. For Windows 95,98,2000,XP: 1 . Open "My Computer" icon, the "Control Panel" folder, and then double click on the "Display" icon. 2 . Select the "Setting" tab. 3 . In the "Desktop Area" you will find the resolution setting. Verify that the resolution setting is less than or equal to 1024 x 768 resolution. If the projector is still not projecting the whole image, you will also need to change the monitor display you are using. Refer to the following steps. 4 . Follow the above steps 1-2. Click on the "Advanced Properties" button. 5 . Select the "Change" button under the "Monitor" tab. 6 . Click on "Show all devices". Then select "Standard monitor types" under the "Manufacturers" box; choose the resolution mode you need under the "Models" box. 7 . Verify that the resolution setting of the monitor display is less than or equal to 1024 x 768. * If you are using a Notebook PC: 1 . You are required to implement the above steps of resolution setting of the computer first. 2 .Switch the Notebook PC display to the "external display only" or "CRT only" mode. * If you experience difficulty in changing resolutions or your monitor freezes, restart all the equipment and the projector. Problem: The screen of the Notebook or Power Book computer is not displaying your presentation. * If you are using a Notebook PC: Some Notebook PCs may deactivate their screens when a second display device is in use. Refer to your computerís documentation for information on how to reactivate the monitor display. * If you are using an Apple PowerBook: In Control Panels, open the PowerBook Display to select Video Mirroring "On". ViewSonic PJ755D 22