Vtech 5801 User Guide - Page 8

Getting Started Registration Registering an i 5801 Handset for the first time After charging, the screen will display: Register Find the BASE ID Code by doing the following (Base must be OFF): 1) At the Base, press MENU. 2) Scroll down to DISPLAY BASE-ID, then press OK. 3) Enter the 15-digit Base ID Code into the Handset. If you make a mistake, move the joystick to the left ( ) to backpace or press the right softkey to erase a character. 4) Press OK to complete the registration process. NOTE: If the Handset, after charging, says "Searching for Base...", press the NEW soft key. "Enter Base ID" will now be displayed. Follow the steps above. Wait approximately 15-60 seconds. You will hear confirmation beeps from the Base and Handset. The newly registered Handset will now be assigned the lowest extension number not previously assigned to a different system Handset (1 - 6). If you do not enter the correct digit sequence, you will see " Invalid Base ID!" and hear an error tone. move the joystick to the left ( ) to backpace or press the right softkey ID Code. to erase a character, and carefully re-enter the Base NOTE: The 15-digit BASE ID Code may contain numbers and characters, such as *. Make sure you carefully enter all 15 digits. 8