Weber 900 LP Owner Manual - Page 10
Step 2, Step 3
View all Weber 900 LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Step 2 Assemble wheel frame You will need: wheel frame, two wheels, two wheel hubcaps, hammer and a block of wood. Set one end of wheel frame on the block of wood (or other hard, protected surface). Put one wheel on axle, WEBER side facing up, and tap on one hubcap. Figure 1. Repeat with other wheel and hubcap. ER WE B ER WE B Step 3 Assemble top frame You will need: left frame, right frame, two 1/4-20 x 1/2 inch bolts, two nylon washers and a 7/16 inch wrench. Note - Work on carpeted area (on grass or one of the boxes) to protect the finish during frame assembly. Lay the leg pieces as shown so the leg tabs point up. Figure 2. Slip the two frame pieces together with the tabs inside. Figure 2 (a). Slip washers on bolts, insert bolts as shown and tighten. Figure 2 (b). (If you try to insert a bolt and there are no holes, you have the left frame turned the wrong way. Turn the left frame around.) Frame tabs Figure 1 (a) Leg tabs Left frame Right frame (b) Figure 2 10