Weider 1120 English Manual - Page 15

Seat Assembly 30 30. Attach the Backrest (16) to the Upright (3) with two M6 x 63mm Screws (70) and two M6 Washers (82). 16 3 70 82 82 70 31. Attach the Seat (15) to the Seat Frame (6) with four M6 x 16mm Screws (62), as shown. 31 15 Wide End 6 62 32. Attach the Lock Plate (73) to the Front Leg (7) with an M10 x 70mm Bolt (86), an M10 Washer (57), and an M10 Nylon Locknut (56). Do not overtighten the Locknut; the Lock Plate must be able to pivot easily. Attach the Leg Lever Pin (38) to the Front Leg (7) with an M4 x 20mm Self-tapping Screw (69). Insert the Leg Lever Pin through the Leg Lever (8) and the Lock Plate (73). 33. Insert the Pad Tube (29) through the Front Leg (7). Slide two Small Foam Pads (28) onto the ends of the Pad Tube. Slide two Small Foam Pads (28) onto the Leg Lever (8). 32 56 57 69 38 8 33 86 73 7 29 28 28 8 28 28 15