Weider 1120 English Manual - Page 6
Frame Assembly - weights
View all Weider 1120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Frame Assembly 1 1. Before beginning assembly, make sure you understand the information in the box on page 5. Refer to the PART IDENTIFICATION CHART in the center of this manual for help identifying small parts. Insert four M8 x 63mm Carriage Bolts (87) up through the Base (1). Note: It may be helpful to place a piece of tape over the bolt heads to hold them in place. 2. Attach the Base (1) and the two Weight Guides 2 (21) to the Stabilizer (2) with two M10 x 67mm Bolts (71), two M10 Washers (57), and two M10 Nylon Locknuts (56). Make sure the indicated holes in the Weight Guides are nearer the bottom. Fully tighten the Locknuts. Attach the Upright (3) to the Base (1) with the two indicated M8 x 63mm Carriage Bolts (87) and two M8 Nylon Locknuts (58). Do not tighten the Locknuts yet. 1 87 87 Holes 21 21 3 58 71 58 71 1 87 57 56 57 2 6