Weider 3130 English Manual - Page 14
Nylon Locknuts yet.
View all Weider 3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
16. Orient a Press Arm Handle (17) with the 90° bend 16 at the top as shown in the inset drawing. Attach a Press Arm Handle (17) to the Right Press Arm (16) with two M10 x 65mm Button Bolts (106), four M10 Washers (80), four 11mm Spacers (99), and two M10 Nylon Locknuts (77). Repeat this step for the Left Press Arm (not shown). 80 99 99 80 99 106 80 16 90° Bend 77 80 90° 99 Bend 17 17. Attach the Left Press Arm (15) to the Right Press Arm (16) with an M10 x 110mm Bolt (93), an 89.5mm Spacer (59) and an M10 nylon Locknut (77). Finish attaching the Press Arms with two M10 x 65mm Bolts (85), two M10 Washers (80), and two M10 Nylon Locknuts (77). Do not tighten the Nylon Locknuts yet. 17 16 77 80 77 59 15 93 85 18. Attach the Left and Right Press Arms (15, 16) to 18 the Base (1) with an M10 x 110mm Bolt (93), an 89.5mm Spacer (59), and an M10 Nylon Locknut (77). Do not over tighten the Nylon Locknut; the Press Arms (15, 16) must be able to pivot freely. Tighten the Nylon Locknuts (77) used in step 17. 14 16 15 77 Grease 1 59 93