Weider 3130 English Manual - Page 16

22. Wrap the Butterfly Cable (50) over a "V"-pulley (47). Attach the "V"-pulley, a Long Cable Trap (57), an M10 Washer (80), and two Guards (54) to the Upright (2) with an M10 x 60mm Bolt (79) and an M10 Nylon Locknut (77). 22 54 79 57 50 47 80 54 2 77 23. Grease an M8 x 22mm Shoulder Bolt (90). Attach 23 the Butterfly Cable (50) to the Right Butterfly Arm (29) with the Shoulder Bolt and an M8 Nylon Locknut (78). Make sure the flat edge of the Cable is against the Butterfly Arm. 90 50 Grease 78 29 24. Identify the Lat Cable (49). Route the Cable up through the Top Frame (4) and over a 90mm Pulley (48). Attach the Pulley inside the Top Frame with an M10 x 80mm Bolt (84), two M10 Washers (80), two 19mm Spacers (67), and an M10 Nylon Locknut (77). Flat Edge 24 48 84 4 80 67 67 80 49 77 16