Weider 3550 User Manual - Page 19

48. Wrap the Squat Cable (73) under a 3 1/2" Pulley 48 (78). Attach the Pulley to the indicated bracket on the Long Base (120) with a 3/8" x 1 3/4" Bolt (93) and a 3/8" Nylon Locknut (87). 49. Wrap the Squat Cable (73) over a 4 1/2" Pulley 49 (119). Attach the Pulley to the indicated bracket on the Top Frame (6) with a 3/8" x 1 3/4" Bolt (93) and a 3/8" Nylon Locknut (87). 78 73 87 93 120 6 87 93 119 73 50. Place a 1/2" Washer (1) on top of the Weight Tube 50 (43) closest to the Squat Upright (4). Tighten a 1/2" Nut (118) halfway onto the end of the Squat Cable (73). Screw the end of the Cable two full turns into the Weight Tube (43). Then, tighten the Nut against the 1/2" Washer (1). 4 73 118 1 43 SEAT ASSEMBLY 51. Locate and open the parts bag labeled "SEAT ASSEMBLY." 51 109 19 23 9 19 Insert the Pad Tube (23) into the square hole in the Seat Upright (9). Slide the two Knee Pads (19) onto the Pad Tube as shown. Press the two Knee Pad Caps (109) into the ends of the Pad Tube. 20 109 10 Slide two Short Pads (20) onto the Leg Lever (10). 20 19