Weider 3550 User Manual - Page 20
Slide an Inner Cap w/Hole 111 onto the Squat
View all Weider 3550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
52. Press two 3/4" x 1 1/2" Inner Caps (116) and a 1 1/4" 52 Square Inner Cap (117) into the Seat Bracket (11). Attach the Seat (16) to the Seat Bracket (11) with two 1/4" x 3/4" Screws (114), a 1/4" x 1 1/2" Screw (99), and a 1/4" Washer (97). Turn the indicated Adjustment Handle (65) counterclockwise several turns to loosen it. Next, pull the Handle and insert the Seat Bracket (11) into the Seat Frame (8). Engage the Handle into one of the holes in the Seat Bracket, and then turn the Handle clockwise until it is tight. 53. Press two 3/4" x 1 1/2" Inner Caps (116) and a 1 1/4" 53 Square Inner Cap (117) into the Backrest Bracket (13). Attach the Butterfly Backrest (15) to the Backrest Bracket (13) with four 1/4" x 3/4" Screws (114). Turn the indicated Adjustment Handle (65) counterclockwise several turns to loosen it. Next, pull the Handle and insert the Backrest Bracket (13) into the Butterfly Upright (3). Engage the Handle into one of the holes in the Backrest Bracket, and then turn the Handle clockwise until it is tight. 54. Attach the VKR Backrest (46) to the VKR Upright 54 (5) with four 1/4" x 3/4" Screws (114). 16 116 11 97 116 114 117 99 8 65 116 3 15 114 65 117 114 13 116 46 114 5 55. Wet one end of the Squat Arm (32) with soapy 55 water. Slide a Short Pad (20) onto the Squat Arm 20 as shown. 32 Attach a Squat Handle (33) to the Squat Arm (32) with two 5/16" x 3/4" Button Head Screws (51). Slide an Inner Cap w/Hole (111) onto the Squat Handle and press it onto the end of the Squat Arm. Wet the Squat Handle with soapy water. Slide an 8" Handgrip (84) onto the Squat Handle. Repeat this step with the other end of the Squat Arm (32). 51 20 51 84 33 111 20