Weider Pro 435 Instruction Manual
Weider Pro 435 Manual
 |
View all Weider Pro 435 manuals
Add to My Manuals
Save this manual to your list of manuals |
Weider Pro 435 manual content summary:
- Weider Pro 435 | Instruction Manual - Page 1
give the following information: • The MODEL NUMBER of the product (WEEVBE33030) • The NAME of the product (WEIDER® PRO 435 weight bench) • The SERIAL NUMBER of the product (see the front cover of this manual) • The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and the EXPLODED DRAWING - Weider Pro 435 | Instruction Manual - Page 2
have been placed on the weight bench. If a decal is missing or illegible, please call our Customer Service Department at 08457 089 009 to order a free replacement decal. Apply the decal in the indicated location. Keep hands and fingers clear of this area. WEIDER is a registered trademark of ICON - Weider Pro 435 | Instruction Manual - Page 3
weight bench. 1. Read all instructions in this manual before using the weight bench. Use the weight bench only as described in this manual. with the same amount of weight on the weight rests to balance the bench. 9. The weight bench is designed to support a maximum user weight of 136 kg (300 lbs - Weider Pro 435 | Instruction Manual - Page 4
will help you to achieve the specific results you want. For your benefit, read this manual carefully before using the WEIDER® PRO 435 weight bench. If you have additional questions, please call our Customer Service Department at 08457 089 009. To help us assist you, please mention the product model - Weider Pro 435 | Instruction Manual - Page 5
Date: / / EXERCISE WEIGHT SETS REPS THURSDAY Date: / / AEROBIC EXERCISE FRIDAY Date: / / EXERCISE WEIGHT SETS REPS Make photocopies of the key number of the part, from the PART LIST on page 18 of this manual. Important: Some parts may have been pre-assembled. If you cannot find a part - Weider Pro 435 | Instruction Manual - Page 6
for Yourself This manual is designed to ensure that the weight bench can be assembled successfully by anyone. Most people find that by setting aside plenty of time, assembly will go smoothly. Before beginning assembly, carefully read the following information and instructions: • Assembly requires - Weider Pro 435 | Instruction Manual - Page 7
using high amounts of weight. Weight Loss To lose weight, use a low amount of weight and increase the exhausted. On the exercise guide accompanying this manual you will find photographs the Front Leg (8) to the Bench Frame (2) with two M10 x 70mm Bolts (18), the Support Plate (14), and two M10 - Weider Pro 435 | Instruction Manual - Page 8
(53). WARNING: Do not place more than 59 kg (130 lbs.) on the Lat Tower (47) or the Leg Lever (4). 4 69 53 STORING THE WEIGHT BENCH To store your weight bench, remove the M10 x 57mm Adjustment Knob (33) and the Ring Pin (43) from the Crossbar (3). Lift the Front Leg (8) as far as it - Weider Pro 435 | Instruction Manual - Page 9
can be stored in the storage tube on the Left Stabiliser (46). However, for some exercises, you should store these parts away from the weight bench so they do not interfere with your exercise. ADJUSTING THE UPRIGHTS To adjust the Uprights (1), unscrew the M10 x 62mm Adjustment Knobs (30) and slide - Weider Pro 435 | Instruction Manual - Page 10
page. 10 ADJUSTMENTS The weight bench is designed to be used with your own weight set (not included). The steps below explain how the weight bench can be adjusted. See EXERCISE GUIDELINES on page 14 for important exercise information and refer to the accompanying exercise guide to see the correct
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
If you encounter any difficulties with this product, or if you need to order replacement parts, call the ICON Health
& Fitness, Ltd. office, or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
Tel:
Outside the UK: 0 (044) 113 387 7133
Fax: 0 (044) 113 387 7125
When ordering parts, please be prepared to give the following information:
•
The MODEL NUMBER of the product (WEEVBE33030)
•
The NAME of the product (WEIDER
®
PRO 435 weight bench)
•
The SERIAL NUMBER of the product (see the front cover of this manual)
•
The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and the EXPLODED DRAWING on
pages 18 and 19).
08457 089 009
www.iconeurope.com
Visit our website at
Model No. WEEVBE33030
Serial No. __________________
Write the serial number in the
space above for reference.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Part No. 197579 R0803A
Printed in China © 2003 ICON Health & Fitness, Inc.
USER’S MANUAL
Serial Number Decal
QUESTIONS?
As a manufacturer, we are
committed to providing com-
plete customer satisfaction. If
you have questions, or if there
are missing or damaged parts,
please call:
Or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
email: [email protected]
08457 089 009
ORDERING REPLACEMENT PARTS
Class HC Fitness Product