Weider Pro 4900 English Manual - Page 11
Arm Assembly
View all Weider Pro 4900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Arm Assembly 16 16. Grease an M10 x 108mm Bolt (99). Orient the Press Frame (13) as shown. Attach the Press Frame to the Left Base (2) with the Bolt and an M10 Nylon Locknut (114). Do not overtighten the Locknut; the Press Frame must be able to pivot easily. 17. Remove the M10 x 45mm Button Bolt (105) from a Press Arm (14). Attach a Press Handle (16) to a Press Arm (14) with an M10 x 65mm Bolt (96), two M10 Washers (116), two M10 x 12mm Spacers (75), and an M10 Nylon Locknut (114). Attach a Press Arm Cap (56) to the Press Arm (14) with an M10 x 45mm Button Bolt (105) and an M10 Large Washer (134). Attach the Press Arm (14) to the Press Frame (13) with two M8 x 70mm Bolts (97) and two M8 Nylon Locknuts (115). Repeat this step with the other Press Arm (14). 17 14 13 99 114 2 105 134 56 16 116 114 75 75 96 116 14 97 115 13 18. Grease an M10 x 108mm Bolt (99). Attach the 18 Leg Press Frame (12) to the Left Base (2) with the Bolt and an M10 Nylon Locknut (114). Do not overtighten the Locknut; the Leg Press Frame must be able to pivot easily. Grease an M10 x 77mm Bolt (133). Attach the Foot Plate (23) to the Leg Press Frame (12) with the Bolt and an M10 Nylon Locknut (114). Make sure the decal on the Foot Plate is right side up. Do not overtighten the Locknut; the Foot Plate must be able to pivot easily. 2 11 Grease 114 133 12 23 114 99 Grease