Weider Pro 9635 English Manual - Page 12
Hold the Spotter 29 - how much weight
View all Weider Pro 9635 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
15. Attach the tether on a Large Pin (13) to the underside of a Spotter (29) with an ST4.2 x 10mm Screw (17). 15 11 Hold the Spotter (29) on the indicated side of 29 an Upright (11), and align the Spotter with one of the adjustment holes in the Upright. Insert the Large Pin (13) through the Spotter and the Upright. Attach the other Spotter (29) to the other Upright (11) in the same way. Attach both Spotters at the same height. 11 29 13 17 16. Make sure that all parts are properly tightened before you use the weight bench. 12
12
16.
Make sure that all parts are properly tightened before you use the weight bench.
29
11
13
17
29
11
15. Attach the tether on a Large Pin (13) to the
underside of a Spotter (29) with an ST4.2 x
10mm Screw (17).
Hold the Spotter (29)
on the indicated side
of
an Upright (11), and align the Spotter with one
of the adjustment holes in the Upright. Insert
the Large Pin (13) through the Spotter and the
Upright.
Attach the other Spotter (29) to the other
Upright (11) in the same way. Attach both
Spotters at the same height.
15