Weider Pro 9940 English Manual - Page 21
Miscellaneous Assembly
View all Weider Pro 9940 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
52. Insert a 1/4" x 2 1/2" Carriage Bolt (45) through the center hole in a Seat Plate (65). Attach the Seat Plate to a Seat (13) with two 1/4" x 3/4" Bolts (49). Insert the 1/4" x 2 1/2" Carriage Bolt (45) into the indicated hole in the Butterfly Seat Frame (14) and secure it with a 1/4" Flat Washer (71) and a 1/4" Nylon Locknut (68). Secure the other end of the Seat (13) with a 1/4" x 2 1/2" Bolt (79) and a 1/4" Flat Washer (71). Attach the other Seat (13) to the Press Seat Frame (7, not shown) in the same manner. 52 13 45 65 14 49 71 68 71 79 Miscellaneous Assembly 53 43 30 Tube 53. Press 3/4" Round Inner Caps (43) into the ends of the Pad Tube (42) and the indicated tube on the Front Leg (20). Insert the Pad Tube (42) into the indicated hole in the Small Leg Lever (41). Slide Foam Pads (30) onto the ends of the Pad Tube and the tube on the Leg Lever. 41 43 30 30 43 20 43 42 30 54. Press a 1 3/4" Square Inner Cap (35) into the indicated end of the Adjustment Tube (90). Attach the Adjustment Tube (90) to the bracket (not visible in the drawing) on the back of the Leg Press Plate (55) with a 5/16" x 2 1/2" Bolt (87), two 5/16" Washers (36), and a 5/16" Nylon Locknut (64). Attach the Leg Press Plate (55) to the Leg Press Lever (83) by placing the Adjustment Tube (90) into the bracket on top of the Leg Press Lever and securing it with the Lock Pin (91). Note: The lip on the Leg Press Plate must be on the upper edge. 54 55 36 64 91 35 90 36 87 83 55. Attach the Curl Pad (105) to the Curl Post (104) with 55 two 1/4" x 3/4" Bolts (49). 105 49 104 21