Weslo Cardiostride 4.0 Treadmill English Manual - Page 10

IMPORTANT: If

Page 10 highlights

8. The Console (20) can use two AA batteries (not included); alkaline batteries are recommended. Do not 8 use old and new batteries together or alkaline, standard, and rechargeable batteries together. IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before you insert the batteries. Otherwise, you may damage the Console or other electronic components. 20 Remove the battery cover from the back of the Console (20), and insert the batteries into the battery compartment (A). Make sure to orient the batteries as shown by the diagram inside the battery compartment. Then, reattach the battery cover. A 9. Hold the Console (20) near the Center Handrail (18). Connect the wire on the Console (B) to the Upper Handrail Wire (19). Attach the Console (20) to the bracket on the Center Handrail (18) with four M4 x 12mm Screws (4). Do not overtighten the Screws. Make sure that the wires are not pinched. 9 B 4 20 19 18 4 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

10
8.
The Console (20) can use two AA batteries (not
included); alkaline batteries are recommended. Do not
use old and new batteries together or alkaline, standard,
and rechargeable batteries together.
IMPORTANT: If the
Console has been exposed to cold temperatures,
allow it to warm to room temperature before you
insert the batteries. Otherwise, you may damage the
Console or other electronic components.
Remove the battery cover from the back of the Console
(20), and insert the batteries into the battery compart-
ment (A).
Make sure to orient the batteries as shown
by the diagram inside the battery compartment.
Then, reattach the battery cover.
8
9.
Hold the Console (20) near the Center Handrail (18).
Connect the wire on the Console (B) to the Upper
Handrail Wire (19).
Attach the Console (20) to the bracket on the Center
Handrail (18) with four M4 x 12mm Screws (4).
Do not
overtighten the Screws.
Make sure that the wires are
not pinched.
9
20
A
20
B
18
4
4
19