Weslo Cardiostride 4.0 Treadmill English Manual - Page 9
Connect the Reed Switch Wire 15 to the Lower
View all Weslo Cardiostride 4.0 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
6. Connect the Reed Switch Wire (15) to the Lower 6 Handrail Wire (8). Clip the Upright Grommet (17) onto the Reed Switch Wire and press the Grommet into the Left Upright (5). 5 17 8 15 7. Have a second person hold the Center Handrail (18) near the Left and Right Handrails (5, 7). Connect the 7 Lower Handrail Wire (8) to the Upper Handrail Wire (19). Tip: Pull out only enough wire to make a connection. Then, insert the wires downward into the Left Handrail. Attach the Center Handrail (18) to the Handrails (5, 7) with four M4 x 12mm Screws (4). Do not pinch the Wires (8, 19). Next, place the treadmill in the storage position (see page 14). Then, center the Frame (11) between the Handrails (5, 7), and tighten the four M8 Nylon Nuts (2). Then, lower the Frame (11) (see page 14). 19 8 4 5 18 4 7 2 11 2 9