Weslo Cardiostride 4.0 Treadmill English Manual - Page 8
Right Handrails 5, 7.
 |
View all Weslo Cardiostride 4.0 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
3. Attach the Hood (10) to the front of the Frame (11) with four M4 x 12mm Screws (4). 3 4 4. Hold the front of the Frame (11) between the Left and Right Handrails (5, 7). 4 The Frame can be inclined at two levels. Align the hole in the Frame (11) with one of the holes in Right Handrail (7). Then, tighten a Knob (12) into each Handrail and into the Frame. Make sure that both Knobs are at the same level. 5 12 10 11 4 7 11 12 5. Insert the Pin (13) into the holes in the Right Handrail (7) and the Frame (11). Make sure that the Pin is fully 5 inserted. Then, attach a Spring Clip (14) to the end of the Pin. IMPORTANT: Make sure that the Pin (13) is fully inserted when the treadmill is being used. 7 11 13 14 8
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14
-
15
-
16
-
17
-
18
-
19
-
20
 |
 |
8
3.
Attach the Hood (10) to the front of the Frame (11) with
four M4 x 12mm Screws (4).
4.
Hold the front of the Frame (11) between the Left and
Right Handrails (5, 7).
The Frame can be inclined at two levels. Align the hole
in the Frame (11) with one of the holes in Right Handrail
(7). Then, tighten a Knob (12) into each Handrail and
into the Frame.
Make sure that both Knobs are at the
same level.
5.
Insert the Pin (13) into the holes in the Right Handrail
(7) and the Frame (11).
Make sure that the Pin is fully
inserted.
Then, attach a Spring Clip (14) to the end of
the Pin.
IMPORTANT: Make sure that the Pin (13) is fully
inserted when the treadmill is being used.
4
4
10
11
3
12
12
5
11
7
4
11
13
14
7
5