Weslo Flex 3xt English Manual - Page 6
Weightband
View all Weslo Flex 3xt manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
The following steps apply only to the FLEX 3XT. 10 10. Wet the insides of two Foam Pads (46) and the ends of a Foam Pad Tube (45) with soapy water. Center the Foam Pad Tube in the Ab Seat Leg (50). Slide the Foam Pads onto the ends of the Tube. Attach the Ab Seat Leg (50) to the Ab Seat Rail (51) with the two Ab Seat Leg Bolts (56), Washers (26) and Nylock Nuts (7). Be sure the weightband post is turned away from the Ab Seat Rail. Weightband Post 51 7 46 • 26 50 5 46 11. Attach the Ab Seat Rail (51) to the Bench Rail (10) with the two Ab Rail Bolts (57), Washers (26) and Nylock 11 Nuts (7). 10 26 7 A 51 6' 12. Wet the inside of a Large Pad (36) and the upper end of the Ab Ami (52). Slide the Pad onto the Ab Arm. Liberally grease the Ab Axle (54). Align the Ab Arm bracket with the hole in the Ab Seat Rail (51). Insert the Ab Axle through the Ab Arm bracket and the Ab Seat Rail. Tap an Ab Axle Cap (53) onto each end of the Ab Axle. Be sure the Ab Arm bracket is turned toward the • 51 Ab Seat Leg (50) as shown before tapping the Axle Caps onto the Axle. 13. Attach the Ab Seat (55) to the Ab Seat Rail (51) with four Seat Screws (8) and Small Washers (9). 13 36 52 53 54 50 Ab Arm Bracket 55\ 8-4 6