Weslo Gym 3000 Uk Manual - Page 6

2. Press the two 2" Outer Caps (88) onto the Stabiliser (5). Insert two 5/16" x 2 3/4" Carriage Bolts (14) and one 5/16" x 2 1/2" Carriage Bolt (1) up through the Stabiliser (5). Slide the end of the Base (4) and the Rear Upright (82) onto the two 5/16" x 2 3/4" Carriage Bolts. Make sure that the Rear Upright is turned as shown. Thread 5/16" Nylon Locknuts (3) onto the two Carriage Bolts. Do not tighten the Nylon Locknuts yet. Slide one end of the Brace (86) onto the 5/16" x 2 1/2" Carriage Bolt (1) in the Stabiliser (5). Thread a 5/16" Nylon Locknut (3) onto the Carriage Bolt. Do not tighten the Nylon Locknut yet. Attach the other end of the Brace (86) to the Rear Upright (82) with a 5/16" x 2 3/4" Bolt (11), a 5/16" Flat Washer (8), and a 5/16" Nylon Locknut (3). Do not tighten the Nylon Locknut yet. 3. Press the 1 1/4" Inner Cap (57) into the Front Upright (42). Attach the 1" Plastic Stop (64) to the centre hole in the Stop Bracket (63) with a 5/16" x 1 1/2" Bolt (24) and 5/16" Nylon Locknut (3). Attach the Stop Bracket (63) to the Front Upright (42) with a 5/16" x 2" Bolt (61), 5/16" Flat Washer (8), and 5/16" Nylon Locknut (3). Slide the Front Upright (42) onto the two 5/16" x 2 1/2" Carriage Bolts (1) in the Base (4). Thread two 5/16" Nylon Locknuts (3) onto the Carriage Bolts. Do not tighten the Nylon Locknuts yet. 2 Low Side 86 3 5 88 1 3 Bracket 82 11 8 88 3 4 14 63 3 8 61 Single Hole 3 64 24 57 42 4 3 1 6