Weslo Momentum G 3.2 Elliptical English Manual - Page 6
Assembly
View all Weslo Momentum G 3.2 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY • To hire an authorized service technician to assemble the hybrid trainer, call 1-800-445-2480. • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you nish assembly. • Left parts are marked "L" or "Left" and right parts are marked "R" or "Right." • To identify small parts, see page 5. • In addition to the included tool(s), assembly requires the following tools: one Phillips screwdriver one adjustable wrench one rubber mallet Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Identify the Rear Stabilizer (28), which has a Leveling Cap (33) on each end. While a second person lifts the rear of the Frame (1), attach the Rear Stabilizer (28) to the Frame with two M8 x 65mm Carriage Bolts (51), two M8 Curved Washers (81), two M8 Split Washers (63), and two M8 Acorn Nuts (58). 1 58 63 81 33 28 51 58 63 1 81 33 2. While a second person lifts the front of the Frame (1), attach the Front Stabilizer (10) to 2 the Frame with two M8 x 65mm Carriage Bolts (51), two M8 Curved Washers (81), two M8 Split Washers (63), and two M8 Acorn Nuts (58). 58 63 81 1 10 51 58 63 81 6