Whirlpool KGSK901SSS Installation Instructions - Page 15
Whirlpool KGSK901SSS Manual
View all Whirlpool KGSK901SSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Replace Oven Racks and Warming or Storage Drawer Replace oven racks in oven cavity. Replace warming drawer or storage drawer. Complete Installation 1. Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped. 2. Check that you have all of your tools. 3. Dispose of/recycle all packaging materials. 4. Check that the range is level. See "Level Range." 5. Use a mild solution of liquid household cleaner and warm water to remove waxy residue caused by protective shipping material. Dry thoroughly with a soft cloth. For more information, see the "Range Care" section of the Use and Care Guide. 6. Read "Range Use" in the Use and Care Guide. 7. Turn on surface burners and oven. See the Use and Care Guide for specific instruction on range operation. If range does not operate, check the following: s Household fuse is intact and tight, or circuit breaker has not tripped. s s s To Replace Warming Drawer: 1. Align the drawer glides with the receiving guides. 2. Push drawer in all the way. Gently open and close the drawer to ensure it is seated properly on the slides. To Replace Storage Drawer: 1. Fit the ends of the drawer rails into the guides in the cavity. 2. Slide the drawer closed. Range is plugged into a grounded 3 prong outlet. Electrical supply is connected. See "Troubleshooting" in the Use and Care Guide. 8. When the range has been on for 5 minutes, check for heat. If the range is cold, turn off the range and check that the gas supply line shutoff valve is open. s If the gas supply line shutoff valve is closed, open it, then repeat the 5-minute test as outlined above. s If the gas supply line shutoff valve is open, press the OFF button on the oven control panel and contact a qualified technician. 15