Whirlpool SF216LXSQ Owners Manual - Page 12

Oven Light, Oven Door, Removing the Oven Bottom - knob

Get Whirlpool SF216LXSQ PDF manuals and user guides
UPC - 883049035079
View all Whirlpool SF216LXSQ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

BROILER PAN AND GRID (on some models) Cleaning Method: Mildly abrasive cleanser: Scrub with wet scouring pad. Solution of cup (125 mL) ammonia to 1 gal. (3.75 L) water: Soak for 20 minutes; then scrub with scouring or steel-wool pad. Oven cleaner: Follow product label instructions. Porcelain enamel only, not chrome Dishwasher To Replace: 1. Grasp the door on the sides with your fingers on the front of the door and your thumbs on the inside surface. 2. Hold oven door so that the top edge of each door slot is horizontal. Insert door hinge into the hinge slots. 3. Tilt top of door toward range. Insert bottom door hinge notch down onto front frame edge. Oven Light The oven light is a standard 40-watt appliance bulb. Press the OVEN LIGHT pad on the electronic oven control to turn on the light. Before replacing, make sure the oven and cooktop are cool and the control knobs are off. To Replace: 1. Unplug range or disconnect power. 2. Turn bulb counterclockwise to remove from socket. 3. Replace bulb. 4. Plug in range or reconnect power. Oven Door For normal range use, it is not suggested to remove the oven door. However, if removal is necessary, make sure the oven is off and cool. Then, follow these instructions. The oven door is heavy. To Remove: 1. Open the oven door. Insert hinge pins, included with your range, into both hinge hangers. Do not remove the pins while the door is removed from the range. 4. Open the door completely and remove the hinge pins. Save hinge pins for future use. 5. Close the door slowly to assure door side panel clearance and proper hinge engagement. Removing the Oven Bottom The oven bottom can be removed for standard cleaning of the oven. Before cleaning, make sure the oven is completely cool. To Remove: 1. Remove the oven racks. 2. Place fingers in the slots in the bottom panel. 2. Grasp the door on the sides with your fingers on the front of the door and your thumbs on the inside surface. A A. Lip 3. Lift the rear of the panel up and back. The lip at the front of the panel should clear the front frame of the oven cavity. 4. Lift the bottom up and out. To Replace: Reverse the steps above. 3. Pull door straight up, then toward you. Do not remove hinge pins until the door is replaced on the range. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
12
BROILER PAN AND GRID
(on some models)
Cleaning Method
:
Mildly abrasive cleanser:
Scrub with wet scouring pad.
Solution of
cup (125 mL) ammonia to 1 gal. (3.75 L) water:
Soak for 20 minutes
;
then scrub with scouring or steel-wool
pad.
Oven cleaner:
Follow product label instructions.
Porcelain enamel only, not chrome
Dishwasher
Oven Light
The oven light is a standard 40-watt appliance bulb. Press the
OVEN LIGHT pad on the electronic oven control to turn on the
light.
Before replacing, make sure the oven and cooktop are
cool and the control knobs are off.
To Replace
:
1.
Unplug range or disconnect power.
2.
Turn bulb counterclockwise to remove from socket.
3.
Replace bulb.
4.
Plug in range or reconnect power.
Oven Door
For normal range use, it is not suggested to remove the oven
door. However, if removal is necessary, make sure the oven is off
and cool. Then, follow these instructions. The oven door is heavy.
To Remove
:
1.
Open the oven door. Insert hinge pins, included with your
range, into both hinge hangers. Do not remove the pins while
the door is removed from the range.
2.
Grasp the door on the sides with your fingers on the front of
the door and your thumbs on the inside surface.
3.
Pull door straight up, then toward you. Do not remove hinge
pins until the door is replaced on the range.
To Replace
:
1.
Grasp the door on the sides with your fingers on the front of
the door and your thumbs on the inside surface.
2.
Hold oven door so that the top edge of each door slot is
horizontal. Insert door hinge into the hinge slots.
3.
Tilt top of door toward range. Insert bottom door hinge notch
down onto front frame edge.
4.
Open the door completely and remove the hinge pins. Save
hinge pins for future use.
5.
Close the door slowly to assure door side panel clearance
and proper hinge engagement.
Removing the Oven Bottom
The oven bottom can be removed for standard cleaning of the
oven.
Before cleaning, make sure the oven is completely cool.
To Remove
:
1.
Remove the oven racks.
2.
Place fingers in the slots in the bottom panel.
A
.
L
i
p
3.
Lift the rear of the panel up and back.
The lip at the front of the panel should clear the front frame of
the oven cavity.
4.
Lift the bottom up and out.
To Replace
:
Reverse the steps above.
A