Whirlpool WFW9640XW Use & Care Guide - Page 17
Modifiers - model
View all Whirlpool WFW9640XW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
EcoBoost option The EcoBoost option allows you to increase your energy savings on the cotton cycles (Whitest Whites and Heavy Duty) while maintaining cleaning performance by lengthening the wash time by 10 minutes. NightQuiet™ option In this option, the washer will sense vibration in the wash cycle and may adjust the spin speed to lower sound levels generated during the spin. Deep Clean with Steam Use this option for heavily soiled loads that need improved stain treatment, loads with multiple types of stains, or loads you suspect as having stains, but are afraid may have been missed (no sorting or searching for stains). When Deep Clean with Steam is selected, the water temperature of the selected wash cycle is automatically set to warm. The water will then be slowly heated to the temperature selected, along with steam, to aid in stain removal. This option will provide optimal removal of organic stains such as blood and grass. Cycle Signal This signal is helpful when you are removing items from the washer as soon as it stops. Press CYCLE SIGNAL to select Loud, Soft, or Off. To activate/deactivate button sound hold cycle signal button for 3 seconds. Modifiers Preset cycle settings of Water Temperature, Spin Speed, Soil Level, and Rinse can be changed. You can change a modifier after starting a cycle anytime before the selected modifier begins. Not all modifiers are available with all cycles and options. Available options will glow amber. Current selections will glow green. If a modifier is unavailable with a selected cycle, the light will not illuminate. NOTE: The panel shown below may be different from that of your model. ■ To change the water temperature, select the WATER TEMP button until the desired setting glows green. ■ To change the spin speed, select the SPIN SPEED button until the desired setting glows green. ■ To change cycle time, select SOIL LEVEL button until the desired setting glows green. ■ To change the rinse, select RINSE button until the desired setting glows green. Water Temp Select a water temperature based on the type of load you are washing. Use the warmest wash water safe for fabrics. Follow garment label instructions. In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well. Soils may be difficult to remove. ■ This washer has a Sanitize water temperature that is certified by NSF International, an independent third-party testing and certification organization. The certification verifies that the sanitizing cycle reduces 99.9% of bacteria typically found on clothing, bedding, and towels, and there is no carryover of bacteria between loads after the cycle is complete. Certified to Sanitize ■ The Sanitize temperature provides an extra high temperature to remove 99.9% of certain bacteria. It is recommended that you set your hot water heater to 120ºF (49ºC) to ensure proper performance during this cycle. ■ The Sanitize Water Temp uses high water temperatures. Please check garment care label to avoid garment damage. ■ In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well. Soils may be difficult to remove. ■ Only cycles with sanitize wash temperature selected have been designed to meet the requirements of NSF Protocol P172 for Sanitizing Efficacy. 17
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52