Xerox 4510N Advanced Features Guide - Page 56

Printer Settings 5. In either the Tray 1 Mode or Tray 2-N drop-down list, select the appropriate setting. 6. Click the Save Changes button at the bottom of the page. Setting the Duration of the Tray 1 Prompt or the Tray 2-N Prompt The tray prompt settings specify the amount of time the prompt displays on the control panel after paper is loaded in the trays. The tray prompt requests the user to confirm the current tray setup or to specify the correct paper type and size. Duration None 30 Seconds Infinite Behavior Turns the tray setup prompt off. Factory default for Trays 2-4. Displays the tray setup prompt for 30 seconds after paper is loaded in the tray. Factory default for Tray 1. Displays the tray setup prompt after paper is loaded in the tray until a control panel selection is made. The printer will not print until a selection is made. To select a Tray 1 or Tray 2-N prompt setting, use one of the following options: ■ The printer's control panel ■ CentreWare IS Using the Control Panel To select the tray prompt setting on the control panel: 1. Select Paper Tray Setup, and then press the OK button. 2. Select either Tray 1 Prompt or Tray 2-N Prompt, and then press the OK button. 3. Select the appropriate duration, and then press the OK button. Using CentreWare IS To select the tray prompt setting using CentreWare IS: 1. Launch your web browser. 2. Enter the printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx). 3. Click Properties. 4. Select the General folder on the left navigation panel, and then select Printer Defaults. 5. In either the Tray 1 Prompt or Tray 2-N Prompt drop-down list, select the appropriate setting. 6. Click the Save Changes button at the bottom of the page. Phaser® 4510 Laser Printer 4-11