Xerox 4510N Advanced Features Guide - Page 57

Printer Settings Changing the Load Paper Timeout When your print job is formatted for a type or size of paper that is not loaded in the printer, the printer's control panel displays a message requesting you to load the appropriate paper. The Load Paper Timeout value controls the amount of time the printer waits before printing on another type or size of paper. To change the Load Paper Timeout value, use one of the following options: ■ The printer's control panel ■ CentreWare IS Using the Control Panel To change the Load Paper Timeout value on the control panel: 1. Select Printer Setup, and then press the OK button. 2. Select Paper Handling Setup, and then press the OK button. 3. Select Load Paper Timeout, and then press the OK button. 4. Scroll to the desired timeout value. The values (None, 1, 3, 5, or 10 minutes, 1 or 24 hours) indicate the length of time you want the printer to wait for you to load paper before printing. If you select a value of None, the printer does not wait for paper to be inserted and immediately picks paper from the default tray. 5. Press the OK button to save the change. Using CentreWare IS To change the Load Paper Timeout value using CentreWare IS: 1. Launch your web browser. 2. Enter your printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx). 3. Click Properties. 4. Select the General folder on the left navigation panel, and then select Printer Defaults. 5. In Timeout Settings, scroll to the desired Load Paper Timeout value. The values (None, 1, 3, 5, or 10 minutes, 1 or 24 hours) indicate the length of time you want the printer to wait for you to load paper before printing. If you select a value of None, the printer does not wait for paper to be inserted and immediately picks paper from the default tray. 6. Click the Save Changes button at the bottom of the screen. Phaser® 4510 Laser Printer 4-12