Xerox 6180N DocuSP Getting Started - Page 31

DOCUSP 4.1 Nuvera Stacker/Finisher Script For the Nuvera family of printers, you must use the following script to set up Stackers and/or Finishers: 1. Open a terminal window. 2. Login as root. 3. Type cd /opt/XRXnps/bin/DFA_IsStacker. 4. Press . 5. Type ./set -f 0 OR ./set -f 1. Use the value 0 if the attached DFA device is a finisher, or use the value of 1 if the attached DFA device is a stacker. Note that there are spaces before and after the -f switch. 6. Restart DocuSP. NOTE: This setting is lost on an upgrade or a scrape install and must be recreated using this procedure. LPR gateway behavior for document title Prior to DocuSP 4.0, the controller applied the LPR gateway filename to submitted documents as opposed to the internally set document name. Starting with DocuSP 4.0, the controller applies the internal document name to the job. To set the DocuSP to the pre-4.0 behavior, run the following script: 1. Open a terminal window. 2. Login as root. 3. Type enablePre40LPRBehavior 4. Press . 5. To disable the pre-4.0 LPR behavior, type disablePre40LPRBehavior 6. Restart DocuSP. NOTE: A document name set in the job ticket has a higher precedence than the LPR gateway and internal document attributes. XEROX DOCUMENT SERVICES PLATFORM SERIES 27 GETTING STARTED