Xerox C2424 User Guide - Page 223

Output Quality Problems Solving Scan-Quality Problems (Continued) Problem Background color, text, or images on copied page are too light or too dark. Solution Press the Clear/Clear All button to reset the default settings. If the problem continues, adjust one or more of these settings: ■ Lighten/Darken: Lightens or darkens the text or image in color copies. ■ Auto Suppression: Minimizes the sensitivity of the scanner to variations in light background colors. This is useful when scanning or copying 2sided originals on thin paper that shows some of the text or images from the back side of the paper. ■ Contrast: Increases or decreases the contrast of the image when it is copied: To adjust the settings: 1. At the control panel, press the Copy button. 2. Select Lighten/Darken, Auto Suppression, or Contrast, then press the Enter button. 3. Do one of the following: ■ Lighten/Darken: Press the Up Arrow or Down Arrow button to scroll to a whole number from Lightest (-3) to Darkest (+3), then press the Enter button. ■ Auto Suppression: Select either On or Off, then press the Enter button. ■ Contrast: Press the Up Arrow or Down Arrow button to scroll to a whole number from Lowest (-3) to Highest (+3) contrast, then press the Enter button. 4. Copy the page again. If copy problems continue, repeat these steps. WorkCentre® C2424 Copier-Printer 7-30