Yamaha 02R96 Studio Manager Owner's Manual - Page 11

Output Channels 8 Output Channels When the Master Layer is selected, the Bus Out and Aux Send channels are displayed. A Bus Out channel is shown here. Aux Send channels appear the same except that they do not have a STEREO button. A STEREO button (Bus Out only) This button is used to route the Bus Out to the Stereo Out. B INSERT button This button is used to turn on and off the Bus Out's Insert. 1 C COMP button This button is used to turn on and off the Bus Out's Compressor. 2 D Compressor curve This display shows the Compressor's curve. E EQ button C This button is used to turn on and off the Bus Out's EQ. D F EQ curve This display shows the Equalizer's curve, which can be set by 5 dragging. 6 G DELAY button 7 8 I This button is used to turn on and off the Bus Out's Delay function. H Delay parameter This parameter is used to set the delay time of the Delay func- tion. Delay times can be set by dragging. I Channel number This is the channel number. J AUTO button This button displays the Automix status of the Bus Out. K SELECT button This button is used to select the Bus Out. J K L SOLO button L This button solos the Bus Out. It appears orange while the Bus M Out is soloed. N M ON button This button turns the Bus Out on and off. It appears orange O while the Bus Out is on. N Short channel name This is the channel's short name. To edit the name, click it and type. P O Channel fader This is the Bus Out's fader. P Channel meter This meter displays the signal level of the Bus Out. Studio Manager for 02R96-Owner's Manual