Yamaha CBX-D5 Owner's Manual 1 - Page 4

SwiStcwhitncghionngtohne tphoewpeorwer 3 3 Figure 1. System connections 50-WAY to 25-PIN SCSI CABLE POWER SUPPLY HARD DISK SCSI 50-WAY SCSI CABLE POWER CABLE POWER CABLE SCSI DMA to SCSI Converter @ DMA IN 19-PIN to 19-PIN D-SUB CABLE POWER CABLE SCSI SCSI TERMINATOR CBX-D5 MIDI OUT HARD DISK MIDI IN MIDI IN MIDI CABLES ATARI ST/STE MIDI OUT Switching on the power 1) Switch on the SCSI devices: CBX-D5, hard disk, SCSI adaptor. 2) Switch on the Atari computer and load Cubase Audio. What to do next • The SCSI hard disk must be formatted before it can be used (refer to the hard disk's Operating Manual). See also "Working with Hard Disks" on page 18 of the CBX-D5 Operating Manual. • For recording and playback you should refer to the Cubase Audio Operating Manuals. See also "Recording" on page 20 and "Playback" on page 23 of the CBX-D5 Operating Manual. Notes: • Other MIDI devices can be connected in this system as shown in "MIDI" on page 30 of the CBX-D5 Operating Manual. • For audio device connection, see "Inputs & Outputs Explained" on page 26 of the CBX-D5 Operating Manual. • For more details about SCSI hard disks and connecting extra disks, see "Connecting Hard Disk Drives" on page 13 of the CBX-D5 Operating Manual. • In this system, only one external hard disk is used. It is, however, highly recommended, for the sake of data integrity, that you use at least two hard disks: one disk for your computer software and data such as Cubase Audio, MIDI song files, etc., and the other disk purely for recording CBX-D5 sound files.