Yamaha DM1000 Owner's Manual - Page 102

102 Chapter 8-Aux Sends Panning Aux Sends You can pair adjacent odd-even (in this order) Aux Sends for stereo operation. This enables you to pan signals from Input Channels to paired Aux Sends. 1 Pair the desired two Aux Sends. (See page 87 for more information on pairing channels.) 2 Use the AUX SELECT [AUX 1]-[AUX 8] buttons to select one of the paired Aux Sends. 3 Press the AUX SELECT [DISPLAY] button repeatedly until the page listed below that contains the desired channels appears. - Pan1-32 page This page enables you to pan signals routed from Input Channels 1-32 to Aux Sends. - Pan33-48 page This page enables you to pan signals routed from Input Channels 33-48 to Aux Sends. The parameters on these two pages (and the procedure for setting them) are the same. 2 3 1 A Aux pan controls These controls adjust the pan setting of signals routed from Input Channels to paired Aux buses. B MODE The MODE parameter determines how paired Input Channels are panned. C INPUT PAN LINK When this parameter is turned on, Aux Sends follow the Input Channel Pan. 4 Move the cursor to the Aux pan control of the desired Input Channel and rotate the Parameter wheel to set the pan value. 5 If necessary, move the cursor to the MODE parameter box and rotate the Parameter wheel to select INDIVIDUAL, GANG, or INV GANG, then press [ENTER]. This Mode setting is independent of the Mode parameter on the Pan page. (See page 67 for more information on Mode options.) DM1000-Owner's Manual