Yamaha DM1000 Owner's Manual - Page 213
ENCODER MODE DISPLAY ACCESS Display AUX 6] button, PAN] button
View all Yamaha DM1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
Pro Tools Remote Layer 213 • [AUX 6] button Press and hold down this button and press the desired [SEL] button to reset the corresponding channel fader level. Press and hold down this button and press the desired Encoder push-switch to reset the corresponding channel panpot to center. While you are holding down the [AUX 6] button, the SELECT ASSIGN parameter indicates "DFLT." • [AUX 8] button Use this button along with the desired [SEL] button to assign a plug-in to the corresponding Pro Tools channel. ■ ENCODER MODE section • [PAN] button When you turn on this button, the Encoders function as Pro Tools channel panpots. • [AUX] button When you turn on this button, the Encoders function as Send A-E level controls. AUX Send destination is selected in the AUX SELECT section. When you press this button, Send A is selected as the destination automatically. If the Encoders are currently set to control the Send A-E levels, the button indicator lights up. ■ FADER MODE section • [FADER/AUX] button This button selects Flip mode (see page 218) for faders, Encoders, and [ON] buttons. ■ DISPLAY ACCESS section • [AUTOMIX] button To display channel Automation mode, press this button while a Channel Display mode or Meter Display mode page is selected. • [PAIR/GROUP] button Press this button while a Channel Display mode or Meter Display mode page is selected to display a Group ID to which each channel belongs. • [EFFECT] button Press this button to display or hide the Inserts window in Pro Tools. ■ Display section • Tab Scroll buttons These buttons switch the INSERT ASSIGN/EDIT parameter settings on Insert Display mode pages. • [F1] button Press this button to turn off the Peak Hold indicator on Meter Display mode pages. Remote Control 17 DM1000-Owner's Manual