Yamaha DSP-A970 Owner's Manual - Page 18
Connecting The Effect Speakers To
View all Yamaha DSP-A970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
CONNECTING THE EFFECT SPEAKERS TO THIS UNIT Connect the FRONT effect speakers to the FRONT effect speaker output terminals of this unit. If the FRONT effect speakers are not used, the FRONT MIX switch should be set to "ON". Connect the REAR effect speakers to the REAR effect speaker output terminals of this unit. NOTE: The speaker connections above are fine for most applications. If for some reason, however, you wish to use an external power amp for any or all of the effect channels, connect the line level output jack(s) for each channel to the INPUT jacks of the external amp and connect the corresponding speaker pair to the speaker terminals of the external amp. NOTE: If the pin plug is inserted in the FRONT/REAR EFFECT out jacks, the speaker output from the built-in amplifier will be cut off. Front effect speaker This unit Front effect speaker Rear effect speaker Rear effect speaker 16