Yamaha EMX312SC Owner's Manual - Page 24
MONITOR Graphic Equalizer, EFFECT RETURN knob, MASTER knob, LEVEL meters, MONITOR OUT jack
UPC - 086792831336
View all Yamaha EMX312SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Controls and Connectors MONITOR Section K L K Graphic Equalizer This 7-band graphic equalizer adjusts the frequency characteristics of the monitor signal that feeds to the MONITOR OUT jack O and (if the POWER AMP N switch is down) to the SPEAKERS B jacks V. Each band can be adjusted by ±12 dB. The base frequencies for the bands are: 125, 250, 500, 1k, 2k, 4k, and 8k Hz. L EFFECT RETURN knob M Adjusts the level of the signal sent from the internal effector to the MONITOR bus. M MASTER knob Adjusts the level of the monitor signal send to the MONITOR OUT jack O and (if the POWER AMP switch is down) to the SPEAKERS B jacks V. N LEVEL meters The L and R meters show the level of the signal output from the MONITOR OUT jack O. If the POWER AMP switch is down, the MONITOR OUT signal also passes through the internal power amp and is then output at SPEAKERS jacks B1 and B2 V. Keep an eye on the LIMITER lamps Q to ensure that the level at the SPEAKERS jacks does not stay too high. O MONITOR OUT jack This unbalanced phone jack outputs the monaural moni- tor signal. You would typically connect this jack to pow- ered speakers used for monitoring. The signal sent to this jack is adjusted by the MONITOR section's MASTER O knob M and the settings of the MONITOR section's graphic equalizer K. 24 EMX512SC/EMX312SC/EMX212S