Yamaha EMX312SC Owner's Manual - Page 5
Contents, Features - mixer
UPC - 086792831336
View all Yamaha EMX312SC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Thank you for your purchase of this Yamaha EMX512SC, EMX312SC, or EMX212S power mixer. Please read through this manual carefully before beginning use, so that you will be able to take full advantage of your mixer's superlative features and enjoy trouble-free operation for years to come. After reading the manual, please store it in a safe place. Contents ■ Basic Quick Guide 6 Before Turning On the Mixer 6 Getting Sound to the Speakers 7 Adding Some Reverb 11 Using the Compressors to Enhance Vocals 12 Making the Most of Your Mixer 13 A Place for Everything and Everything in its Place .... 13 A Plethora of Connectors-What Goes Where? ... 13 Balanced, Unbalanced-What's the Difference? .. 14 Signal Levels and the Decibel 15 Making Better Mixes 15 Approaching the Mix-Where Do You Start? ...... 15 To EQ or Not to EQ 16 Ambience 17 The Modulation Effects: Phasing, Chorus, and Flanging 18 Compression 18 ■ Reference Controls and Connectors 20 Controls on Each Channel 20 Digital Effects Section 22 MAIN Section 23 MONITOR Section 24 POWER Section 25 Rear Panel 26 Connecting Speakers 27 Horizontal Orientation, Tilting and Rack Mounting 28 Horizontal Orientation 28 Tilting 29 Rack Mounting 29 Setting Up 30 Troubleshooting 31 Specifications 32 Features Input Channels page 20 The EMX offers four monoaural mic/line input channels (1 to 4) and four stereo input channel pairs (5/6 to 11/12), allowing you to freely mix inputs from microphones, linelevel devices, and stereo devices. For example, you can mix four microphones with four stereo devices, or seven microphones with one stereo synthesizer. Phantom Power (+15V page 25 A single switch turns phantom power on to all mic inputs. Use this feature to provide power to condenser microphones. High-Quality Digital Effects page 22 The mixer's internal effector is in the same league as our SPX effector series, allowing you to create a rich range of variations with no external help. But of course you are also free to use the EFFECT OUT jack to connect to an external effector of your choice. MAIN and MONITOR Outputs page 23 The mixer offers excellent independent control of main and monitor output. The top panel offers separate main and monitor outputs, while the POWER AMP switch can be used to set the SPEAKERS jacks so that they output either the main signal to both speakers or else the main signal to one speaker and the monitor signal to the other. Separate MASTER control knobs and 7-segment graphic equalizers are also provided. Compressors (EMX512SC and EMX312SC only page 21 Compressors on channels 1 to 4 can be used to squeeze the dynamic range of inputs such as microphones and acoustic guitars, attenuating the higher levels and bringing out the lower ones. This feature helps reduce distortion and allows overall volume to be set higher, resulting in a stronger and more impressive sound. Tilt Setup or Rack Mount page 29 The EMX can be positioned at an angle or mounted in a rack, allowing for easy accessibility in a wide variety of setups. Internal Power Amp page 25 The internal amp makes it possible to connect the SPEAKERS jacks directly to non-powered speakers, with no need for an external amplifier in between. The rear panel offers two types of speaker connectors: phone jacks and Neutrik Speakon jacks. EMX512SC/EMX312SC/EMX212S 5