Yamaha FGDP-50 FGDP-50 FGDP-30 Startup Guide - Page 20

Various Functions (FGDP-50) Stop: Hit [7 START/STOP] of the RGB square pad. NOTE You can mute the drum part by briefly pressing [1 DRUM MUTE] of the RGB square pad or playback only the drum part by briefly pressing [8 DRUM SOLO] of the RGB square pad. RGB Square Pads These are self-illuminating pads which light colorfully in time with performance, making it visually interesting as well as providing additional pads/sounds for you to play. In Session Creator (p.19), these are also used to select a section. Registration Memory A batch of settings can be registered to a button, and you can recall these settings anytime with a single touch. This convenient function is called Registration Memory. Register or recall the settings with the following operations. Registration: Press and hold one of the buttons until the LCD screen indicates that registration is complete. The current settings will be registered to the pressed button. Recall: Briefly press one of the buttons. NOTICE Do not hold down the button if you just want to recall a registration, since holding down the button will register and overwrite the settings. Panel Lock To prevent unintended operation by accidentally touching an unnecessary button during performance, all buttons other than the pads can be temporarily disabled (locked). Buttons for power operation and panel unlocking are active even when Panel Lock is enabled. Lock: Move to the home screen of each mode (e.g., press button twice)  press and hold until the LCD screen shows the panel is locked. Unlock: Press and hold panel is unlocked. until the LCD screen shows the 20 FGDP-50 FGDP-30 Startup Guide