Yamaha LS9-32 Dme-n Network Driver Installation Guide For Ls9 - Page 10

TCP/IP Settings Windows XP 1 Select [Start] → [Control Panel]. The "Control Panel" is displayed. 2 If the control panel appears as category view, click [Switch to Classic View]. 3 Double-click [Network Connections] → [Local Area Connection]. The "Local Area Connection Status" dialog box will be displayed. n If the "Local Area Connection properties" dialog box appears, skip ahead to step 5. 4 Click [Properties]. The "Local Area Connection Properties" dialog box will be displayed. 5 Select [Internet Protocol (TCP/IP)], then click [Properties]. The "Internet Protocol (TCP/IP) Properties" dialog box will be displayed. 6 Click [Use the following IP address]. 7 Enter your computer's IP address into [IP address], the Gateway's IP address into [Default gateway], and "255.255.255.0" into [Subnet mask]. n When installing on the same subnet as the DME unit(s), set the gateway's host address to 254. 8 Click [OK]. 9 Restart your computer. DME-N Network Driver Installation Guide for LS9 10