Yamaha PSR-550 Owner's Manual - Page 142
General Midi System On, 6-3-3 Xg Parameter Request Receive Only
View all Yamaha PSR-550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
MIDI Data Format (3-6-1-2) TEMPO CONTROL binary hexadecimal 11110000 F0 01000011 43 01111110 7E 00000000 01 0ttttttt TT 0ttttttt TT 0ttttttt TT 0ttttttt TT 11110111 F7 Exclusive status YAMAHA ID Style Tempo4 Tempo3 Tempo2 Tempo1 End of Exclusive The internal clock will be set to the received Tempo value. Tempo Meta Event is a large data block (24-bit), it is divided into 4 groups with 7-bits going into each of the Tempos 1-4 (4 receives the remaining 3 bits). (3-6-2) UNIVERSAL SYSTEM EXCLUSIVE (3-6-2-1) UNIVERSAL REALTIME MESSAGE (3-6-2-1-1) MIDI MASTER VOLUME (Receive only) binary hexadecimal 11110000 F0 Exclusive status 01111111 7F Universal Realtime 01111111 7F ID of target Device 00000100 04 Sub-ID #1=Device Control Message 00000001 01 Sub-ID #2=Master Volume 0sssssss SS Volume LSB 0ttttttt TT Volume MSB 11110111 F7 End of Exclusive or 11110000 F0 Exclusive status 01111111 7F Universal Realtime 0xxxnnnn XN When N is received N=0-F, whichever is received. When N is transmitted N always=0. X = don't care 00000100 04 Sub-ID #1=Device Control Message 00000001 01 Sub-ID #2=Master Volume 0sssssss SS Volume LSB 0ttttttt TT Volume MSB 11110111 F7 End of Exclusive The volume for all channels will be changed simultaneously. The TT value is used as the MIDI Master Volume value. (the ss value is ignored.) (3-6-2-2) UNIVERSAL NON REALTIME MESSAGE (3-6-2-2-1) GENERAL MIDI SYSTEM ON binary hexadecimal 11110000 F0 Exclusive status 01111110 7E Universal Non-Realtime 01111111 7F ID of target Device 00001001 09 Sub-ID #1=General MIDI Message 00000001 01 Sub-ID #2=General MIDI On 11110111 F7 End of Exclusive or 11110000 F0 Exclusive status 01111110 7E Universal Non-Realtime 0xxxnnnn XN When N is received N=0-F, whichever is received. When N is transmitted N always=0. X = don't care 00001001 09 Sub-ID #1=General MIDI Message 00000001 01 Sub-ID #2=General MIDI On 11110111 F7 End of Exclusive Depending upon the received ON message, the System Mode will be changed to XG. Except MIDI Master Tuning, all control data be reset to default values. This message requires approximately 50ms to execute, so sufficient time should be allowed before the next message is sent. The bank select message for the channel 10 and the NRPN message are not received in the GM mode. (3-6-3) XG STANDARD (3-6-3-1) XG PARAMETER CHANGE (3-6-3-1-1) XG SYSTEM ON binary hexadecimal 11110000 F0 01000011 43 0001nnnn 1N 01001100 4C 00000000 00 00000000 00 01111110 7E 00000000 00 11110111 F7 Exclusive status YAMAHA ID Device Number Model ID Address High Address Mid Address Low Data End of Exclusive Depending upon the received ON message, the SYSTEM MODE will be changed to XG.Controllers will be reset, all values of Multi Part and Effect, and All System values denoted by "XG" data within All System will be reset to default values in the table. This message requires approximately 50ms to execute, so sufficient time should be allowed before the next message is sent. 142 (3-6-3-1-2) XG PARMETER CHANGE binary hexadecimal 11110000 F0 Exclusive status 01000011 43 YAMAHA ID 0001nnnn 1N Device Number 01001100 4C Model ID 0aaaaaaa AA Address High 0aaaaaaa AA Address Mid 0aaaaaaa AA Address Low 0ddddddd DD Data | | 11110111 F7 End of Exclusive For parameters with data size of 2 or 4, transmit the appropriate number of data bytes. For more information on Address and Parameters, refer to < Table 1-2 > - < Table 1-5 >. The data types listed below are transmitted and received. System Data Multi Effect1 Data Multi Part Data Drums Setup Data (3-6-3-2) XG BULK DUMP binary hexadecimal 01110000 F0 01000011 43 0000nnnn 0N 01001100 4C 0bbbbbbb BB 0bbbbbbb BB 0aaaaaaa AA 0aaaaaaa AA 0aaaaaaa AA 0ddddddd DD | | 0ccccccc CC 11110111 F7 Exclusive status YAMAHA ID Device Number Model ID ByteCount MSB ByteCount LSB Address High Address Mid Address Low Data Check sum End of Exclusive For more information on Address and Byte Count, refer to < Table 1-2 > - < Table 1-5 >. The Check Sum value is set such that the sum of Byte Count, Address, Data, and Check Sum has value zero in its seven least significant bits. If the top of the block is appointed to the Address the XG Bulk Dump, Bulk Request will be received. The Block is a unit that consists of the data, arranged in the list, as the Total Size. The data types listed below are transmitted and received.(These are transmitted only after a Bulk Dump request is received.) System Data System Information (Transmit ONLY) Multi Effect1 Data Multi Part Data Drums Setup Data (3-6-3-3) XG PARAMETER REQUEST (Receive only) binary hexadecimal 11110000 F0 Exclusive status 01000011 43 YAMAHA ID 0011nnnn 3n Device Number 01001100 4C Model ID 0aaaaaaa AA Address High 0aaaaaaa AA Address Mid 0aaaaaaa AA Address Low 11110111 F7 End of Exclusive For more information on Address and Byte Count refer to < Table 1-2 > - < Table1-5 >. The data types listed below are received. System Data Multi Effect1 Data Multi Part Data Drums Setup Data (3-6-3-4) XG DUMP REQUEST (Receive only) binary hexadecimal 11110000 F0 Exclusive status 01000011 43 YAMAHA ID 0010nnnn 2n Device Number 01001100 4C Model ID 00aaaaaaa AA Address High 00aaaaaaa AA Address Mid 00aaaaaaa AA Address Low 11110111 F7 End of Exclusive For more information on Address and Byte Count refer to < Table 1-2 > - < Table1-5 >. The data types listed below are received. System Data System Information Multi Effect1 Data Multi Part Data Drums Setup Data 150